Rola-chem RC554XXP Dual ORP/pH Digital Controller Manuel d'utilisateur télécharger pdf (Page 6)

Rola-Chem Digital Controller PN 554326 02/17/2014 Page: 6 of 20

NOTE: When automating any body of water, it is essential to size the feeders to reach

desired levels in a relatively short period of time. Generally, automating an existing body of

water with existing feeders will require the output of the feeders be increased accordingly. If

feeders are unable to keep up with demand in a short period of time, automation becomes

ineffective.

3.2 Specifications

Parameter Display Control Factory Default .

pH: 6.8 to 8.4 7.0 to 8.0 7.4

ORP: 0 to 995 mV

ORP1: (5 mv increments) 400 mV to 900 mV 650mV

ORP1: (5 mv increments) 400 mV to 890 mV 640mV

Input Power

120 Volts AC, 50/60 HZ, 3 wire grounded power cord.

Combined load not to exceed 10 amps.

GFCI source required

Output Power

120 Volts AC, 50/60 HZ, ORP1, OPR2 and pH , 3.15 amps each (fused)

Two 3-wire grounded power receptacles

Terminal strip for hardwire applications (included)

Displays:

ORP and pH – red digital

Power and flow indicator – LED

Alert indicator & Feed indicator- LED (pH, ORP1& OPR2)

Mode indicator- LED (pH ,ORP1, ORP2 , Auto)

NOTE- feed lamps flash during the feed time and are on constant during the delay time of

the feed cycle.

Operating Temperature: 40 to 120° F

Selectable Features

+ ORP1& ORP2 settings +pH settings + Manual feed (Feed Once)

+ ORP1& ORP2 feed/delay times + pH feed/delay times + pH calibration

+High & low ORP and pH alerts + Reset

+ Acid/base feed + Keypad Lockout + Adjustable time-out

+ ORP and pH Interlock

Features and Options

+ Flow switch input + Individually fused outputs + 120 vac transformer

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Pas de commentaire

Rola-chem RC554XXP Dual ORP/pH Digital Controller Manuel d'utilisateur Page 6